Calibration
Regulators
.25/1.5 LPM Flow Control
|
Model RP Cylinder .25 lpm* |
467895 |
|
Model RP Cylinder 1.5 lpm |
467896 |
*
Can be used with chlorine and ammonia; replaces P/N 809945.
Natural Gas Demand Regulator
This low-pressure Demand Regulator is designed to be used with MSA Instrument Calibration Systems to supply 100% natural gas. The Demand Regulator will automatically supply 100% natural gas to the calibrator as required. No adjustments are necessary or provided. Like the Gas Miser Regulator, the Natural Gas Regulator features an automatic ON/OFF valve that releases gas only on demand. Comes complete with (barb type) outlet fitting and easily connects to natural gas supply with W"
NPT thread.Recommended for use with pressure of
0.3 to 5.0 psig.
|
Natural Gas Demand Regulator |
710545 |
Gas Miser® Demand Regulator: The Intelligent Regulator
The Gas Miser Regulator is the most advanced, yet simpleto- use calibration gas delivery system available. Made of nickel-plated brass and polished aluminum (especially
important for reactive gases), the Gas Miser Regulator can supply gas flow from 0.1 lpm to 3.0 lpm. But that’s only the beginning. Designed for use with any MSA Model RP
Calibration Cylinder except chlorine and ammonia*, the Gas Miser Regulator features an automatic ON/OFF valve that releases gas only on demand. So only the amount of
gas needed to calibrate your MSA instrument is delivered accurately. When the calibration is complete, the Gas Miser Regulator shuts off automatically. And, for user convenience, the regulator can stay connected to the cylinder where it remains in a ready state—making it ideal for such fixed installations as work benches and calibration stations.
The Gas Miser Regulator also eliminates the need to change regulators to accommodate different
instruments or flow rates. It’s not only intelligent, it’s cost-efficient. Supplied with calibration tubing and special fitting.
* A Gas Miser Regulator for chlorine and ammonia is available for Model
P/N 10034391
|
Model RP |
710288 |
|
Model RP, Chlorine and Ammonia |
10034391 |
|
Model BD-20,with CGA 590 fitting |
710289 |
Model RP Combination Regulators
Two regulators in one. Trigger activation allows a
bump test or calibration check in the "SQUEEZE"
mode or fixed-flow calibration in the up or
"LOCKED" position. Designed for use with all
Model RP and Econo-Cal calibration cylinders.
Supplied with calibration tubing and special
fitting.
Gas Miser® Manifold
The Gas Miser Manifold is not only a cylinder
holder but it also incorporates a 4-station "bump
test" or calibration manifold. It works with Model
RP and Econo-Cal cylinders and Gas Miser regulator on any pumped or aspirated instrument. The manifold will supply the correct amount of gas required and will bump test or calibrate up to four instruments simultaneously. Gas Miser regulator sold separately.
|
Model RP Combination Regulator,.25 lpm |
711175 |
|
Model RP Combination Regulator,1.5 lpm |
711174 |
|
4-station Manifold |
710274 |
Model RP Calibration Check Kits
Model RP Check Kits consist of a regulating valve which includes a gauge
to measure container pressure, an adapter hose, sensor adapter (where
applicable), instructions, and a case fitted with room for two Model RP
cylinders of calibration check gas.
|
Check Kit,Model RP, with 1.5 lpm regulator—complete |
477150 |
|
Check Kit,Model RP, with 0.25 lpm regulator—complete |
477149 |
Fax: (773) 538-8080