FALL PROTECTION [BACK]  [NEXT]

HORIZON® HORIZONTAL LIFELINE

The MSA Horizon Horizontal Lifeline anchorage connecting system is designed for portability, versatility, ease of installation and ease of use. The

system may be mounted to existing overhead steel beams or to newly constructed steel structure where overhead anchorage points are not

available. Horizontal travel through intermediate supports is achieved without disconnection of the worker’s personal fall arrest system. The system

may accommodate up to five persons. The unique shock absorber reduces dynamic forces transmitted to the anchorage points. Stanchion system

may be installed on the top or bottom flange of an I-beam. Typical applications include new construction (steel erection), inspection and maintenance

operations, loading bays, bridges, overpasses, aircraft hangars, manufacturing, petrochemical, chemical and food processing plants. Meets

OSHA requirements.

Part No.  

Description

506682  

Beamgrip for beams with flange width: 3.94" to 5.64" flange thickness: .205" to .659"

415171  

flange width: 5.525" to 8.07" flange thickness: .36" to 1.09"

415172  

flange width: 8.06" to 10.475" flange thickness: .56" to .935"

415173  

flange width: 10.265" to 12.8" flange thickness: .605" to 1.25"

415836  

Horizontal lifeline shock absorber

506563  

3/8" open wedge socket

506636  

Beamgrip bypass fitting

506637  

Beamgrip end fitting

506648  

3/8" wire rope, galvanized, length must be specified at the time of order

506662  

12" turn buckle with plate

506663  

Snatch block pulley for 3/8" wire rope

506254  

for 1/2" wire rope

506255  

for 5/8" wire rope

 

Fax: (773) 538-8080

 Telephone: (800) 275-8239                        Website: www.supersafety.com     page 170