Versa-Hood™ Air-Supplied Hood
The Versa-Hood Air-Supplied Hood is an inexpensive hood respirator which may be used anywhere a Type-C air-supplied hood is required. This versatile hood is available in two lengths (shoulder- and waist-length) and two materials (Tyvek and Saranex). All Versa-Hood respirators can be used with either a plant air system or personal air compressor.
When head protection is needed, a special three-point Velcro system secures the hood to an MSA V-Gard Cap. The hood suspensions (basic or ratchet versions) are easily adjustable and stable, minimizing the need for a chin strap. The hood is designed to be disposable, thus eliminating the need for cleaning, and a twin-lens system extends the life of the hood. MSA also offers a package of ten replacement lenses. An air-distribution system keeps the lens fog-free.
NIOSH certified.For more complete information, see Data Sheet 01-02-01.
Versa-Hood Assembly with 1/2" Direct Connectors
Air Supply Hose, Socket and Hood Assemblies
|
1/2-inch air-supply hose (B) - 25' neoprene |
483809 |
|
1/2-inch air-supply hose (B) - 50' neoprene |
483810 |
|
1/2-inch air-supply hose (B) - 100' neoprene |
483811 |
|
Snap-Tite socket for 1/2-in hose system (C) (female with union adapter) |
484236 |
|
Complete Hood Assembly (D) (with Tyvek Hood), shoulder length, with male Snap-Tite connector |
484769 |
|
Complete Hood Assembly (D) (with Tyvek Hood), waist length, with male Snap-Tite connector |
484770 |
Hood Assembly Components
|
Male Snap-Tite plug for 1/2-inch hose (E) |
633539 |
|
Hood hose 3/8-inch NPT (H) |
483606 |
|
Shoulder-length Tyvek hood (I) |
482612 |
|
Waist-length Tyvek hood |
482610 |
|
Belt holder (F) |
483623 |
|
PVC support belt (G) |
473902 |
Additional Options and Replacement Parts for Versa-Hood Air-Supplied Hood
|
Special V-Gard slotted cap, small |
482646 |
|
Special V-Gard slotted cap, standard |
482647 |
|
Optional chinstrap, elastic (for use with cap) |
484319 |
|
Optional chinstrap, cotton webbing (for use with cap) |
484320 |
|
Basic hood suspension |
482614 |
Note: This Versa Hood Assembly would typically require a compressor that puts out between 10 to 12 cfm per person at 3-1/2 to 20 psi. Required inlet pressure is based on airline hose length.
Fax: (773) 538-8080