Escort ELF® and Escort® LC Sampling Pumps
Escort ELF Sampling Pumps
The patented Escort ELF Sampling Pump can be used for
personal and area sampling. The state-of-the-art electronic
laminar flow sensor, consisting of a laminar flow element and
pressure sensor, provides constant flow (volume) control, with
±
2.5% regulation of flow rate (from 1 to 3 lpm) and automaticcompensation for changes in battery voltage, temperature,
altitude, and sample load.
An internal secondary standard calibrates the pump continuously
and needs to be checked against a primary standard only
once a month (or every
200 hours for coal mine dust sampling).
Approvals
Escort ELF Sampling Pumps are UL approved as intrinsically safe
for use in hazardous locations—Class
1,Groups A,B,C,D; Class II,Groups E,F, and G;and Class III, Division I locations. NIOSH-certified
for coal mine dust sampling (TC-
74-030).MSHA certified asintrinsically safe for underground use (Approval No.
2G-3924-1).
Escort ELF Kits
|
Escort ELF Pump with flow fault indicator,110V single-unit charger, Gemini® Twin Port Sampler, and standard packaging |
805559 |
|
Escort ELF Pump with flow fault indicator, 110V single-unit charger, sampling line, and standard packaging |
805560 |
Replacement Parts
|
Battery Pack with O-ring |
497702 |
|
One Replacement Inlet Water Stop Filter |
802897 |
|
Escort Pump Overhaul Kit—common components for routine maintenance |
802922 |
|
Inlet Dust Filter (pkg of 5) |
808935 |
Escort ELF® Sampling Pump
Escort LC Sampling Pumps
The Escort LC Sampling Pump can be used with a variety of personal
and area sampling devices to collect such airborne contaminants as
asbestos fibers, toxic gases, vapors, particulates, fumes, and mists.
It can also be used to sample silica dust, coal dust, and organic vapors.
The Escort pump is exceptionally compact, lightweight, and quiet in
operation. Engineered for use in "hostile" environments, the unit can be sprayed with water while it is operating without being damaged.
Approvals
Escort LC Sampling Pumps are UL approved as intrinsically safe for use in hazardous locations— Class I, Groups A, B, C, D; Class II ,Groups E, F,
and G; and Class III, Division I locations.
Escort LC Kit
|
Escort LC Pump with 110V single-unit charger, sampling line and standard packaging |
711400 |
Escort® LC Sampling Pump
Assemble-to-Order (ATO) System:
You Make the Choices
The ATO System makes it easy to "custom-order" Escort Pumps,configured
exactly the way you want them.
You can choose from an extensive line of base instrument components and
accessories. See the ATO Chart on the following page.
To obtain a copy of the ATO via FAX, call MSA QuickLit Information Service at
1
-800-672-9010.At the prompt,request QuickLit Document #2346 (ATOfor Escort and Escort ELF and Escort LC Sampling Pumps).
MSA Sampling Pump Accessories
MSA sampling pump accessories and air sampling equiment allow
monitoring of many different contaminants in various applications.
Sampling pump accessories can be used in personal and area sampling for a
wide variety of airborne contaminants such as asbestos fibers, toxic gases,
vapors, particulates, mists, and fumes.
Accessories for MSA sampling pumps include filter media,a cyclone assembly,
preweighed filter cassettes, filter holder assemblies, impingers, the
Gemini® Twin-Port Sampler, sorbent tubes, and calibrators.
For more information, see Data Sheet
08-09-01.Replacement Parts and Accessories
Battery Chargers—MSA Omega® Chargers
|
120VAC 50/60 Hz |
494716 |
|
220VAC 50/60 Hz |
495965 |
|
120/240VAC 50/60 Hz (five-unit) |
801759 |
Sampling Equipment
|
Sampling line only |
456226 |
|
10mm Cyclone Assembly to separate respirable dust from non-respirable dust |
456243 |
|
Gemini Twin-Port Sampler for sorbent tubes |
497697 |
|
10mm Cyclone Assembly to separate respirable dust from non-respirable dust, for use with 37 mm non-MSA cassettes |
10044015 |
Carrying Accessories—Jacket
|
Leather jacket |
811741 |
Battery Chargers
Sampling Equipment
Leather Jacket
Fax: (773) 538-8080