LEVEL A
Sizes:
S - 5X
Case Pack
1
Case Weight
30 lbs. |
NFPA 1991
Certified Garments
Fully encapsulated vapor protective suit Level A
Front Entry Style TK600T LY
Rear Entry Style TK601T LY
Wide View Front Entry Style TK645W 2X $3624.2
Wide View Rear Entry Style TK655W
DuPont™
Tychem® TK exhibits excellent chemical barrier
properties and offers an extremely durable fabric that
is puncture- and tear-resistant. Tychem® TK fabric shows
at least 30 minutes of barrier protection to 322
challenge chemicals with no observed breakthrough.
Tychem® TK is specifically developed for protection
against toxic, corrosive gases, liquids and solid
chemicals. This high-performance chemical barrier fabric
is suited for industrial, HazMat, and domestic
preparedness applications.
- Certified compliant to the
2005 edition NFPA 1991, Standard on Vapor-Protective
Ensembles for Hazardous Materials Emergencies as
well as optional Liquefied Gas Protection
Performance Requirements of the standard.
- Ensemble consists of a
Tychem® TK chemical protective encapsulated Level A
inner suit combined with an aluminized fiberglass
outer suit
- Encapsulated Level A garment
design is our highest level of protection from from
liquid splash and vapor/gas exposures for both the
wearer and respiratory equipment
- Double taped seams provide
strong chemical resistance against heavy liquid
splashes. A sewn seam is covered, both inside and
outside of garment with compatible
chemical-resistant material by heat-sealing.
- Expanded faceshield provides
wide 220 degree viewing angle. EX faceshield is
three-layer laminate composed of 40 mil PVC/5 mil
Teflon® /20 mil PVC
- Front entry design allows
wearer to partially don garment (maintain standby
position) without assistance
- Expanded back to accommodate
self-contained air breathing apparatus (SCBA)
- Vapor tight zipper. Extra
long to increase garment opening and aid donning and
doffing
- Storm flap covers zipper
which can be secured by the wearer with rugged hook
and loop material to prevent intrusion at zipper
- Three component glove
system: inner Ansell® Barrier® glove provides broad
range chemical protection, middle Neoprene gloves
provide mechanical and physical durability to
protect inner Barrier® glove and outer knit glove
made of Kevlar® for abrasion and cut resistance.
- Gloves are attached with
vapor tight ring and clamp system and are
replaceable. Interface between glove and garment
sleeve forms an airtight seal.
- Integrated socks composed of
garment material
- Attached flaps are designed
to cover boot tops to help reduce potential for
liquid intrusion
- Four exhaust valves release
higher pressure inside encapsulating garments while
simultaneously helping to prevent inward leakage of
external vapors or particles into the garment.
One-way valves are positive pressure and open on
demand. Valves include splash covers made of barrier
material to help prevent liquid intrusion. Valves
are located on left back of head and right lower
back.
- Internal adjustable waist
belt system for support and improved fit
- Oversuit allows ensemble to
meet flame impingement requirements of NFPA
1991-2005 and is composed of aluminized fiberglass
substrate, seams are sewn with Nomex® thread to
maintain garment integrity when exposed to flame
(per ASTM F1358), extra-wide Lexan® faceshield for
wide (200 degree) viewing angle, four exhaust vents,
expanded back design, elastic wrists and ankles.
- Each suit has a unique
serial number and is fully tested at time of
manufacture including positive air pressure
integrity testing per ASTM F1052.
(800) 275-8239. |
|
Available with
Sealed Seams or
Sealed Seam Plus for maximum protection
|
Other products as follows Interceptor.
Superior Chemical
Protective Clothing from Super Safety™
your Distributor for Lakeland Industries, Inc. Level A
Interceptor®
Interceptor®
Sizes available up to 5XL at
additional cost; contact
www.supersafety.com for details (800) 275-8239
|
LEVEL A
CONFIGURATIONS - DuPont™ TYCHEM® TK |
45 Onguard (Bata) EZ Fit
Hazmax Boots Sized S-XL Fitted to the suit if included / If not
included separately $ 156.00
ALL THE PART NUMBERS BELOW ARE BEING
REPLACED
Sizes:
S - 5X
Case Pack
1
Case Weight
30 lbs.
Also
available in standard lens
as shown above:
|
NFPA 1994 Class 2
Certified Garments
Fully
encapsulated vapor protective suit Level A
Wide
View Front Entry Style TK640W 2X Cost $ 3624.20
Front Entry Style TK640 2 X Cost $ 1353.04
Rear
Entry Style TK658
Fully encapsulated front entry vapor-protective suit
(Level A), expanded back, sealed seam plus inside and
out, 48” zipper, double storm flap with hook and loop
closure, 2 layer faceshield (10 mil Teflon®/40 mil PVC),
One Glove® Hazmat glove which has a Kevlar® outer glove,
Nomex® inner glove and a Fluropolymar barrier film, 2
exhaust valves, attached sock boots with boot flaps,
1.5” waist belt with 3 belt loops sewn (inside) and
sealed. Storage bag included.
NFPA 1994 is the Standard for Protective Ensembles for
Chemical/Biological Terrorism Incidents.
Class I Ensembles offer the highest level of protection.
They are intended for the worst case circumstances,
where the substance involved creates an immediate
threat, is unidentified, and of unknown concentration.
Such situations would occur where there is still an
on-going release with likely gas/vapor exposure, the
responder is close to the point of release, and most
victims in the area
appear to be unconscious or dead from exposure. Stay
times in the hazard zone are likely to be short and
limited to the breathing air available from the SCBA.
|
Style TK650 Rear Entry |
Fully encapsulated Level A Deluxe Suit
Front Entry Style TK640
Rear Entry Style TK650
Tychem® TK fully encapsulated, vapor-protective suit
(Level A), expanded back, sealed seams inside and out,
48'' zipper, double storm flap with Velcro®, 2 layer
faceshield (10 mil Teflon®/40mil PVC), 3 layer glove
combination of Butyl®, North® Silvershield® and outer
knit Kevlar®, 2 Pirelli® valves, attached sock boots
with boot flaps, 1.5'' waist belt with 3 belt loops sewn
(inside) and sealed. Storage bag included. This garment
offers Level A protection.
Sizes:
S - 5X
Case Pack
1
Case Weight
10 lbs. |
Style TK660 |
Fully encapsulated Level A Standard Suit
Flat Back, Front Entry Style TK620
Flat Back, Rear Entry Style TK630
Expanded Back, Front Entry Style TK660
Expanded Back, Rear Entry Style TK670
Tychem® TK fully encapsulated, vapor-protective suit
(Level A), sealed seam on outside, 48'' zipper, double
storm flap with Velcro®, 20 mil PVC faceshield, Butyl®
gloves, 2 Pirelli® valves, attached sock boots with boot
flaps, 1.5'' waist belt with 3 belt loops sewn (inside)
and sealed. Storage bag included. This garment offers
Level A protection.
Sizes:
S - 5X
Case Pack
1
Case Weight
10 lbs. |
LEVEL B
CONFIGURATIONS - TYCHEM® TK |
|
|
|
|
Coverall, Style TK120
Tychem® TK coverall, hood, elastic face, wrists,
and ankles. This garment
offers Level B protection. |
Coverall, Style TK130
Tychem® TK coverall, hood, elastic face, wrists and
ankles. This garment offers Level B protection. |
Coverall, Style TK140
Tychem® TK coverall, hood, elastic face, open wrists,
attached boots. This garment offers Level B protection. |
Coverall, Style TK150
Tychem® TK coverall, hood, elastic face, elastic wrists,
attached boots. This garment offers Level B protection. |
Sizes: S - 5X |
Sizes: S - 5X |
Sizes: S - 5X |
Sizes: S - 5X |
Case Pack
3 |
Case Pack 3 |
Case Pack 3 |
Case Pack 3 |
Case Weight 15 lbs. |
Case Weight 15 lbs. |
Case Weight 16 lbs. |
Case Weight 16 lbs. |
NONE OF THESE PART NUMBERS ARE VALID LAKLANDS PART NUMBERS REPLACED
BY DUPONT TK
|
|
|
|
Coverall, Style TK155
Tychem® TK coverall, expanded back for SCBA, elastic
face, elastic wrists, over boots. This garment offers
Level B protection. |
Coverall, Style TK160
Tychem® TK coverall, hood, elastic face, elastic wrists
attached boots with boot flaps. This garment offers
Level B protection. |
Coverall, Style TK165
Tychem® TK coverall, hood, respirator fit hood, double
storm flap with Velcro®, elastic face and wrists,
attached boots with boot flaps. This garment offers
Level B protection. |
Coverall, Style TK166
Tychem® TK coverall, respirator fit hood, double storm
flap with Velcro, elastic face, wrists and ankles. This
garment offers Level B protection. |
Sizes: S - 5X |
Sizes: S - 5X |
Sizes: S - 5X |
Sizes: S - 5X |
Case Pack
3 |
Case Pack 3 |
Case Pack 3 |
Case Pack 3 |
Case Weight 18 lbs. |
Case Weight 16 lbs. |
Case Weight 16 lbs. |
Case Weight 17 lbs. |
|
|
|
Coverall, Style TK170
Tychem® TK coverall, hood, elastic face and wrists with
splash guards, sock boots with boot flaps. This garment
offers Level B protection. |
Encapsulated Suit,
Style TK400
Tychem® TK encapsulated suit (Level B), rear entry, flat
back, 48'' zipper, storm flap, 20 mil PVC faceshield,
elastic wrists, 1 exhaust port with shroud, air tube
inlet, attached sock boots with boot flaps. This garment
offers Level B protection. |
Encapsulated Suit, Level B
Front Entry Style TK440
Rear Entry Style TK450
Tychem® TK encapsulated suit (Level B), expanded back,
48'' zipper, storm flap with Velcro®, 20 mil PVC
faceshield, elastic wrists, 2 exhaust ports with
shrouds, attached sock boots with boot flaps. This
garment offers Level B protection. |
Sizes: S - 5X |
Sizes: S - 5X |
Sizes: S - 5X |
Case Pack 3 |
Case Pack
1 |
Case Pack
1 |
Case Weight 17 lbs. |
Case Weight 15 lbs. |
Case Weight 15 lbs. |
OTHER
CONFIGURATIONS - TYCHEM® TK |
These part numbers are
being replaced. Order whil you can producst may not ship for
some time most cases 4 to 8 weeks
|
|
|
Coverall, Style TK100
Tychem® TK coverall, collar, elastic wrists and ankles. |
Coverall, Style TK110
Tychem® TK coverall, collar, elastic wrists and ankles. |
Coverall, Style TK115
Tychem® TK coverall, collar, elastic wrists and over
boots, 5'' storm flap. |
Sizes: S - 5X |
Sizes: S - 5X |
Sizes: S - 5X |
Case Pack 3 |
Case Pack 3 |
Case Pack 3 |
Case Weight 15 lbs. |
Case Weight 15 lbs. |
Case Weight 15 lbs. |
|
|
|
|
Jacket, Style TK250
Tychem® TK jacket, collar, zipper, elastic wrists,
double storm flap with Velcro®. |
Jacket, Style TK260
Tychem® BR jacket, drawstring hood, zipper front, double
storm flap with Velcro®, elastic wrists. |
Pants, Style TK300
Tychem® TK pants, elastic waist, hemmed cuffs. |
Bib Pants, Style TK320
Tychem®
TK bib
pants with suspenders, hemmed cuffs. |
Sizes: S - 5X |
Sizes: S - 5X |
Sizes: S - 5X |
Sizes: S - 5X |
Case Pack
6 |
Case Pack 6 |
Case Pack 6 |
Case Pack 6 |
Case Weight 12 lbs. |
Case Weight 12 lbs. |
Case Weight 12 lbs. |
Case Weight 12 lbs. |
Level D would include other things such as work
clothes, boots, splash safety glasses and hard hat however, the
other configurations here would add protection.
|
|
|
|
Apron, Style TK730
Tychem® TK apron, long sleeves, elastic wrists, Velcro
straps at neck, ties in back. |
Apron, Style TK735
Tychem® TK apron, bib style, knee length, ties at neck
and waist. |
Boot Covers, Style TK740
Tychem® TK boot covers, (extends over calf), elastic at
top. |
Sleeves, Style TK765
Cost Manufacturers Suggested Retail
Call for pricing.
Tychem®
TK
sleeves, elastic ends
Discounts available for orders of 4 or more cases. |
Sizes: 32'' Length |
Sizes: 26''W x 36''L |
Sizes: S, M, L, XL |
Sizes: 18'' Length |
Case Pack 12 |
Case Pack 12 |
Case Pack 12 pair |
Case Pack 12 pair |
Case Weight 12 lbs. |
Case Weight 10 lbs. |
Case Weight 9 lbs. |
Case Weight 9 lbs. |
|
|
Hood, Style TK710
Tychem® TK hood (pullover), bell shape, elastic face. |
Hood, Style TK714
Tychem®
TK hood,
short bib style, 20 mil PVC lens, 2'' Velcro® straps
under arms with 4'' hook side straps. |
Sizes: One Size |
Sizes: S - 5X |
Case Pack 12 |
Case Pack 6 |
Case Weight 8 lbs. |
Case Weight 9 lbs. |
|
The SUPER SAFETY™ globe is a trademark of
Super Safety™. The DuPont Oval Logo, DuPont™, The
miracles of science™, Cool-Guard®, Kevlar®, NexGen®,
Nomex®, ProShield®, Reflector®, Responder® CSM,
SafeSPEC™, Teflon®, Tempro®, Thermobond®, THERMO-MAN®,
Tychem®, Tyvek®, and Viton® are trademarks or registered
trademarks of E.I. du Pont de Nemours and Company or its
affiliates. All rights reserved.
Auer®
is a registered trademark of MSA Rose. Barrier® is a
registered trademark of Ansell. Interceptor™ and the
Lakeland™ Logo registered trademark of Lakeland, Best®
and Hustler™ are trademarks or registered trademarks of
Showa-Best Glove, Inc. Guardian™ is a trademark of
Guardian Manufacturing. NESC® is a registered trademark
of The Institute of Electrical and Electronic Engineers
(IEEE). Pirelli® is a registered trademark of Pirelli &
C. S.p.A. Saranex™ is a trademark of Dow Chemical
Company. Scott® is a registered trademark of Scott
Health & Safety. Silver Shield® is a registered
trademark of TriCon Environmental, Inc. Survivair® is a
registered trademark of Sperian Protection Group. TLV®
is a registered trademark of the American Conference of
Governmental Industrial Hygienists. All other tradenames
are property of their respective owners.
|